上海吉都国际贸易有限公司

当前位置:首页>技术服务 > 技术资料 > 国际螺纹标准 > ISO公制牙距=0.75

ISO Metric Fine Thread DIN 13-4

Compared to standard threads, a fine thread has a smaller pitch which increases the resilience. It is used e.g. for adjusting screws in measuring instruments because it allows for finer settings. The term consists of the letter M, the nominal diameter and the pitch, the flank angle is 60°

Nominal Diameter mm	Pitch mm	Tapping Drill Size mm
M 5.0	0.75	4.19
M 5.5	0.75	4.69
M 6.0	0.75	5.19
M 6.5	0.75	5.69
M 7.0	0.75	6.19
M 7.5	0.75	6.69
M 8.0	0.75	7.19
M 8.5	0.75	7.69
M 9.0	0.75	8.19
M 9.5	0.75	8.69
M 10.0	0.75	9.19
M 10.5	0.75	9.69
M 11.0	0.75	10.19
M 11.5	0.75	10.69
M 12.0	0.75	11.19
M 12.5	0.75	11.69
M 13.0	0.75	12.19
M 13.5	0.75	12.69
M 14.0	0.75	13.19
M 14.5	0.75	13.69
M 15.0	0.75	14.19
M 16.0	0.75	15.19
M 17.0	0.75	16.19
M 18.0	0.75	17.19
M 19.0	0.75	18.19
M 20.0	0.75	19.19
M 21.0	0.75	20.19
M 22.0	0.75	21.19
M 23.0	0.75	22.19
M 24.0	0.75	23.19
M 25.0	0.75	24.19
M 26.0	0.75	25.19
M 27.0	0.75	26.19
M 28.0	0.75	27.19
M 29.0	0.75	28.19
M 30.0	0.75	29.19
M 31.0	0.75	30.19
M 32.0	0.75	31.19
M 33.0	0.75	32.19
M 34.0	0.75	33.19
M 35.0	0.75	34.19
M 36.0	0.75	35.19
M 37.0	0.75	36.19
M 38.0	0.75	37.19
M 39.0	0.75	38.19
M 40.0	0.75	39.19
M 41.0	0.75	40.19
M 42.0	0.75	41.19
M 43.0	0.75	42.19
M 44.0	0.75	43.19
M 45.0	0.75	44.19
M 46.0	0.75	45.19
M 47.0	0.75	46.19
M 48.0	0.75	47.19
M 49.0	0.75	48.19
M 50.0	0.75	49.19
M 51.0	0.75	50.19
M 52.0	0.75	51.19
M 53.0	0.75	52.19
M 54.0	0.75	53.19
M 55.0	0.75	54.19
M 56.0	0.75	55.19
M 57.0	0.75	56.19
M 58.0	0.75	57.19
M 59.0	0.75	58.19
M 60.0	0.75	59.19
M 61.0	0.75	60.19
M 62.0	0.75	61.19
M 63.0	0.75	62.19
M 64.0	0.75	63.19
M 65.0	0.75	64.19
M 66.0	0.75	65.19
M 67.0	0.75	66.19
M 68.0	0.75	67.19
M 69.0	0.75	68.19
M 70.0	0.75	69.19
M 72.0	0.75	71.19
M 75.0	0.75	74.19
M 76.0	0.75	75.19
M 78.0	0.75	77.19
M 80.0	0.75	79.19
M 82.0	0.75	81.19
M 85.0	0.75	84.19
M 88.0	0.75	87.19
M 90.0	0.75	89.19
M 92.0	0.75	91.19
M 95.0	0.75	94.19
M 98.0	0.75	97.19
M 100.0	0.75	99.19
M 102.0	0.75	101.19
M 105.0	0.75	104.19
M 108.0	0.75	107.19
M 110.0	0.75	109.19