上海吉都国际贸易有限公司

当前位置:首页>技术服务 > 技术资料 > 国际螺纹标准 > Whitworth Fine DIN LON 282

Whitworth Fine Thread DIN LON 282, 12 TPI

Attention!

Please do not mistake this thread for the Whitworth Fine Thread BS 84. This thread is an old one which is not used anymore. The nominal diameter and the pitch are mentioned in millimeters or in TPI.
Used in locomotive construction approx. until 1975.
The flank angle is 55°.

Diameter for bolt and nut
Thread Size	Tapping Drill Size	Core Area	TPI	Pitch
Thread Size	mm	cm²	TPI	mm
W 23 x 1/12"	20.29	3.23	12	2.117
W 26 x 1/12"	23.29	4.26	12	2.117
(W 28 x 1/12")	25.29	5.02	12	2.117
W 30 x 1/12"	27.29	5.85	12	2.117
(W 32 x 1/12")	28.29	5.74	12	2.117
W 33 x 1/12"	30.29	7.21	12	2.117
W 34 x 1/12"	31.29	7.69	12	2.117
W 36 x 1/12"	33.29	8.70	12	2.117
W 37 x 1/12"	34.29	9.23	12	2.117
W 39 x 1/12"	36.29	10.33	12	2.117
W 40 x 1/12"	37.29	10.92	12	2.117
(W 42 x 1/12")	39.29	12.12	12	2.117
(W 43 x 1/12")	40.29	12.75	12	2.117
(W 46 x 1/12")	43.29	14.72	12	2.117